SONY OEM CAMERA MODULE FCB-EV7520A
REQUEST OEM PRICING »
The FCB-7520A OEM Camera module has a built-in 30x optical zoom and back-illuminated CMOS sensor with 0.01 lx minimum illumination allow capturing of high-fidelity images even at night or in low-light environments, which is very useful for security applications. Please also visit our updated Sony FCB-EW9500H model.
Back-illuminated CMOS sensor
1/2.8-type Exmor RTM CMOS image sensor provides full high-definition and high-quality images. Fine, high-quality images can be captured even at night or in dark places. The back-illuminated CMOS image sensor almost doubles sensitivity*1 and reduces noise compared to traditional front-illuminated CMOS image sensors. Light is received on the back side of the silicon board to effectively capture fine, high-quality images at night or in dark places, which could not be achieved by the image element structure of traditional front-illuminated sensors. *1: Comparison of our back-illuminated CMOS image sensor and traditional (front-illuminated) sensors that have the same image element size (1.75 μm)
High-performance 30x lens OEM Camera Module
The FCB-EV7520A camera is equipped with a bright lens with 30× optical zoom and F1.6 aperture.
Highly advanced ISP
Using the image signal processor (ISP), the following images can be obtained.
■ Full HD 60 fps output image
■ Low focal plane distortion image using the high-speed readout of imager
Wide Dynamic Range (Wide-D)
Wide Dynamic Range mode is a function for dividing an image into several blocks and correcting blocked-up shadows and blown-out highlights in accordance with the intensity difference. It enables you to obtain images in which portions ranging from dark to light can be recognized, even when capturing a subject with a large intensity difference that is backlit or includes extremely light portions.
Visibility Enhancer (VE)
Depending on the imaging scene, the Visibility Enhancer function makes the darker part of a camera image brighter, and automatically correct brightness and contrast to show bright parts clearly.
Defog (low/mid/high)
When the surrounding area of the subject is foggy and low contrast, the defog mode will reduce the effects of the fog and make the subject appear clearer.
You can select from four levels: OFF, Low, Middle and High. The effect level can be automatically adjusted according to the fog density.
Low Focal Plane Distortion Image
The FCB-EV7520A capatures a high-speed moving image with distortion reduction.
Noise Reduction (NR)
The NR function removes noise (both random and nonrandom) to provide clearer images.
Privacy Zone masking
Privacy Zone masking protects private objects and areas such as house windows, entrances, and exits which are within the camera’s range of vision but not subject to surveillance. Privacy zone masking can be masked on the monitor to protect privacy. Mask can be displayed on 8 places per screen Individual on/off zone masking settings.
Image Stabilizer
Switching On the Image Stabilizer function reduces image blurring caused by, for example, vibration, which allows you to obtain images without much blurring. A correction effect is possible for a vibration frequency of around 10 Hz.
StableZoom™
“StableZoom” is a function for performing correction using the Image Stabilizer function in accordance with the zoom ratio, and smoothly zooming up to approximately 36× using a combination of the optical zoom and digital zoom.
Picture Effect
- E-FLIP :This function reverses the video output from the camera vertically and horizontally.
- FREEZE: This function captures an image in the field memory of the camera so that this image can be output continuously.
- BLACK & WHITE: (Monochrome Image)
Auto ICR
Auto ICR Mode automatically switches the settings needed for attaching or removing the IR Cut Filter. With a set level of darkness, the IR Cut Filter is automatically disabled (ICR On), and the infrared sensitivity is increased. With a set level of brightness, the IR Cut Filter is automatically enabled (ICR Off).
see specifications and drawing